Snow Plough Scraper Rubber Sheet

High abrasion grade 60° Shore SBR for extreme-duty scraper applications

Technical Specification

Material: High Abrasion SBR Rubber

Hardness: 60° Shore A

Grade: Premium Abrasion-Resistant

Width: 1.4 metres (standard)

Thickness Range: 6mm – 25mm

Sold: Per Linear Metre

Engineered for Extreme Abrasion

Our high abrasion grade snow plough scraper rubber sheet is specifically engineered for extreme-duty applications where conventional rubber fails. Manufactured from premium 60° Shore A SBR (Styrene Butadiene Rubber) compound, this material delivers exceptional abrasion resistance, tear strength, and impact resilience—making it the material of choice for snow plough blades, industrial scrapers, conveyor wipers, and hard chute linings.

The 60° Shore A hardness provides the optimal balance between flexibility and wear resistance. Soft enough to conform to irregular surfaces and absorb impact, yet hard enough to resist cutting, tearing, and abrasive wear from continuous contact with concrete, asphalt, gravel, and frozen surfaces. This specialized formulation significantly extends service life compared to standard rubber compounds.

Performance Characteristics

Exceptional Abrasion Resistance — Withstands continuous scraping against concrete, asphalt, and frozen surfaces
60° Shore A Hardness — Optimal balance of flexibility and wear resistance for scraper applications
High Tear Strength — Resists tearing and cutting from sharp objects and impact damage
Impact Resilience — Absorbs shock and impact without cracking or permanent deformation
Cold Temperature Performance — Maintains flexibility in sub-zero conditions down to -30°C
Extended Service Life — Significantly outlasts standard rubber in abrasive applications

Applications & Industries

Snow Plough Blades

Cutting edges, scraper blades, snow plough liners, municipal snow clearing equipment

Industrial Scrapers

Conveyor belt scrapers, belt cleaners, wiper blades, material handling equipment

Chute & Hopper Linings

Hard chute linings, discharge chutes, hopper liners, material transfer points, wear strips

Agricultural & Construction

Grader blades, bulldozer edges, agricultural scrapers, road maintenance equipment

Why 60° Shore A for Scraper Applications?

The 60° Shore A hardness specification is critical for scraper blade performance. Softer compounds (40-50° Shore A) wear too quickly and lack structural integrity under load. Harder compounds (70-80° Shore A) become brittle in cold weather and fail to conform to surface irregularities, reducing scraping efficiency. Our 60° Shore A formulation delivers the optimal balance—flexible enough to maintain surface contact and absorb impact, yet hard enough to resist abrasive wear and maintain edge integrity throughout extended service intervals.

Material Properties

Property	Value
Material Type	SBR (Styrene Butadiene Rubber)
Hardness (Shore A)	60° ± 5
Abrasion Resistance	Exceptional (High Grade)
Tensile Strength	≥ 10 MPa
Elongation at Break	≥ 400%
Tear Resistance	Excellent
Temperature Range	-30°C to +70°C
Specific Gravity	1.15 – 1.20
Colour	Black

Fabrication & Installation

Cutting & Shaping: Can be cut to size using sharp utility knives, band saws, or water-jet cutting. For snow plough blades, cut to required length and drill mounting holes as per equipment specifications.

Mounting: Secure using bolts, rivets, or mechanical fasteners. Pre-drill holes slightly larger than fastener diameter to allow for thermal expansion/contraction.

Thickness Selection: 6-10mm for light-duty scrapers and wipers, 12-15mm for standard snow plough blades, 20-25mm for heavy-duty industrial applications and hard chute linings.

Maintenance: Inspect regularly for wear and damage. Replace when edge wear exceeds 50% of original thickness or when scraping efficiency declines.

Ordering Information

Available Thicknesses: 6mm, 8mm, 10mm, 12mm, 15mm, 20mm, 25mm

Sheet Width: 1.4 metres (standard)

Pricing: Per linear metre (1.4m² per metre)

Hardness: 60° Shore A (high abrasion grade)

Colour: Black (standard)

Roll Length: Typically 10 metres (custom lengths available)

UK stock held for rapid dispatch. Custom thicknesses, widths, and die-cutting services available for project quantities. For alternative hardness grades (50°, 70°, 80° Shore A) or polyurethane scraper blades, please contact our technical team.

Technical Support & Custom Fabrication

Our technical team provides complimentary advice on hardness selection, thickness recommendations, mounting methods, and custom fabrication for snow plough blades, industrial scrapers, and chute linings. We offer die-cutting, drilling, and custom shaping services for project quantities. Contact us for technical specifications, bulk pricing, and fabrication quotes for municipal, agricultural, and industrial applications.

Rubber Sheet UK | SBR, EPDM, Nitrile & Neoprene

Snow Plough Scraper Rubber Sheet – 60° Shore SBR | High Abrasion Grade | Blade & Chute Lining | Per Metre

Heavy Duty Commercial Rubber Sheet | Sold Per Linear Metre UK

6mm Rubber Sheet Matting UK | Durable, Slip-Resistant | Commercial & Industrial | Sold Per Linear Metre